About Network Engineer
Network engineering is the craft of designing, building, and running the networks that
connect every device, office, and cloud service, and this course follows the order most
engineers learn it. It starts with Networking Fundamentals (the OSI and
TCP/IP models), then Switching & VLANs and
IP Addressing & Subnetting so you can build and segment real
networks.
Next comes Routing Protocols: static routes, OSPF, EIGRP, and BGP.
From there, Network Services covers DNS, DHCP, NAT, and NTP, while
Wireless Networking covers Wi-Fi standards, controllers, and secure
access with WPA3 and 802.1X.
Network Security covers firewalls, ACLs, VPNs, and IPsec, and
Monitoring & Troubleshooting covers a structured fault-finding
method with ping, traceroute, Wireshark, SNMP, and flow data.
Finally, Network Automation covers Python, Ansible, and device APIs,
and Cloud & Data Center Networking covers VPCs, SD-WAN, VXLAN, and
hybrid connectivity: the skills that separate someone who configures devices from
someone who runs a network at scale.
Content
10 modules
01
Networking Fundamentals
The OSI and TCP/IP models, how data moves across a network, and the core devices and protocols involved.
OSI ModelTCP/IPEthernet
02
Switching & VLANs
How switches forward frames, segmenting networks with VLANs and trunks, and preventing loops with Spanning Tree.
VLANs802.1Q TrunkingSpanning Tree
03
IP Addressing & Subnetting
Working with IPv4 and IPv6, CIDR notation, and subnetting a network to fit real requirements.
IPv4 / IPv6CIDRSubnetting
04
Routing Protocols
Configuring static routes and dynamic routing with OSPF, EIGRP, and BGP, and how routers choose the best path.
OSPFEIGRPBGP
05
Network Services
The services that keep a network usable day to day: DNS, DHCP, NAT, NTP, and how they are configured and troubleshot.
DNSDHCPNAT
06
Wireless Networking
Wi-Fi standards, access points and controllers, channel planning, and securing wireless networks with WPA3 and 802.1X.
Wi-Fi 6WPA3802.1X
07
Network Security
Protecting the network with firewalls, ACLs, VPNs, and IPsec, plus segmentation and the basics of zero trust.
FirewallsACLsIPsec VPN
08
Monitoring & Troubleshooting
A structured approach to diagnosing faults with ping, traceroute, and packet captures, backed by SNMP and flow monitoring.
WiresharkSNMPNetFlow
09
Network Automation
Replacing manual CLI work with Python, Ansible, and device APIs, and managing configuration as code.
PythonAnsibleREST / NETCONF
10
Cloud & Data Center Networking
Designing networks in the cloud and the data center: VPCs, SD-WAN, VXLAN, load balancing, and hybrid connectivity.
AWS VPCSD-WANVXLAN
What You Can Do After This Course
By the end of the curriculum you'll have worked through 5 hands-on projects and
covered the core of what a junior to mid-level network engineer role expects. Concretely,
you'll be able to:
Explain how networks work: trace a packet from source to destination using the OSI and TCP/IP models.
Build and segment networks: configure switches, VLANs, and trunks, and plan address space with subnetting.
Route traffic: set up static routing, OSPF, EIGRP, and BGP, and explain how routers pick a path.
Run core services: deploy and troubleshoot DNS, DHCP, NAT, and NTP.
Deploy secure wireless: design Wi-Fi coverage and protect it with WPA3 and 802.1X.
Secure the network: apply firewalls, ACLs, VPNs, and IPsec, and segment traffic by risk.
Troubleshoot and automate: diagnose faults with packet captures and monitoring, then automate changes with Python and Ansible across on-prem and cloud networks.