Module 03 of 10

IP Addressing & Subnetting

Lessons

About This Module

Every device on a network needs an address, and every network engineer needs to be comfortable reading, planning, and dividing them. IP addressing is how devices are identified, and subnetting is how you carve address space into networks of the right size.

You'll start with IPv4 addresses and how they look in binary, then move on to subnet masks and CIDR notation so you can work out network ranges, host counts, and broadcast addresses. You'll finish with IPv6, the longer address format designed to replace IPv4.

With addressing in place, you'll be ready for the next module, Routing Protocols, which looks at how routers move traffic between these networks.

Lessons

4 videos
01

IP Address: IPv4 vs IPv6 Tutorial

What an IP address is, how IPv4 and IPv6 addresses differ, and how an address is converted to binary.

02

Intro to IPv4 Subnetting

Keith Barker covers the basics of IPv4: address classes, network masks, and the building blocks you need before splitting a network into subnets.

03

Subnetting Made Easy: Full Tutorial for Beginners

A complete beginner walk-through of subnetting from scratch, including CIDR notation, working out subnet sizes, and finding network and host ranges.

04

IPv6 Basics for Beginners

The structure of an IPv6 address, including the network prefix and interface ID, and how it differs from the IPv4 addressing you have just learned.