Module 02 of 10

Switching & VLANs

Lessons

About This Module

Inside almost every office, campus, and data center, traffic moves through switches. This module looks at how a switch decides where to send each frame, and how you can shape a local network to be organized, secure, and resilient.

You'll start with how a switch learns MAC addresses and builds its forwarding table. Then you'll see how VLANs split one physical network into separate logical ones, how 802.1Q trunks carry several VLANs over a single link, and how Spanning Tree Protocol blocks redundant paths so loops never take the network down.

With Layer 2 in place, you'll be ready for the next module, IP Addressing & Subnetting, which moves up to Layer 3 and how devices are addressed across networks.

Lessons

4 videos
01

What Is a Network Switch? How It Works

A beginner-friendly animated look at what a switch does, how it connects devices on a local network, and how it uses MAC addresses to forward traffic.

02

How Does a Switch Learn MAC Addresses?

How a switch builds its MAC address table by reading the source address of each frame, and how it uses that table to forward, filter, or flood traffic.

03

How VLAN Tagging Works: 802.1Q Trunking

How VLANs split one physical network into separate logical ones, and how 802.1Q tagging lets a single trunk link carry several VLANs between switches.

04

How STP Works: Preventing Loops in Any Network

How Spanning Tree Protocol elects a root switch, chooses root and designated ports, and blocks redundant links to stop switching loops and broadcast storms.