Hands-on builds

Projects

Projects

About These Projects

The best way to make the modules stick is to build and configure real networks. These five projects take you from building a network in Packet Tracer through OSPF routing, troubleshooting a broken network, and a DHCP exhaustion attack, and finish with the full CCNA Mega Lab.

Each one is a hands-on video, so you can pause, build it yourself in Packet Tracer and adapt it to your own ideas. Pick the project that matches the module you've just finished and come back for the rest.

Projects

5 builds
01

Build a Network in Cisco Packet Tracer

Build a small network from scratch in Packet Tracer: set up the topology, configure devices and IP addresses, and test connectivity with ping, a hands-on drill for the first modules.

02

Configure OSPF with Passive Interfaces & a Default Route

A Jeremy's IT Lab Packet Tracer lab that configures OSPF, including passive interfaces and advertising a default route, and changes the OSPF metric with the reference bandwidth.

03

Troubleshoot Static Routes

A Jeremy's IT Lab Packet Tracer lab on finding and fixing a static routing problem when traffic between networks is not getting through.

04

Run a DHCP Exhaustion Attack with Kali Linux

A lab from Jeremy's IT Lab that runs a DHCP starvation attack against a router, showing how a simple attack can take a network service down.

05

Complete the CCNA Mega Lab

A full-network capstone from Jeremy's IT Lab covering OSPF, VLANs, STP, DHCP, security and wireless in one large Packet Tracer lab.