Module 04 of 10

Routing Protocols

Lessons

About This Module

Addresses tell you where a device is, but routing is what actually gets traffic there. Routers read each packet's destination, consult their routing table, and pass it along the best path, hop by hop, across networks of any size.

You'll start with the difference between static and dynamic routing, then look at how routers share and compare routes automatically. From there the module covers OSPF, the link-state protocol widely used inside organizations, and BGP, the protocol that exchanges routes between networks across the internet. Cisco's EIGRP is the other common interior protocol you'll meet on the job.

With routing in place, you'll be ready for the next module, Network Services, which covers the services that keep a network usable day to day, such as DNS, DHCP, and NAT.

Lessons

4 videos
01

What is Dynamic Routing? Static vs Dynamic Routing

The difference between routes you configure by hand and routes that routers learn automatically, and when each approach makes sense.

02

OSPF Introduction

The basics of Open Shortest Path First: how OSPF routers find neighbors, share link information, and work out the best path to each network.

03

OSPF Explained: Full Lecture and Lab Tutorial

A deeper look at OSPF fundamentals followed by a hands-on lab, so you can see how the protocol is configured and verified in practice.

04

BGP Explained

How the Border Gateway Protocol exchanges routes between autonomous systems, and why it is the routing protocol that holds the internet together.