Module 06 of 10

Wireless Networking

Lessons

About This Module

Most devices today connect to the network without a cable. Wireless networking uses radio waves to carry the same traffic you've seen on wired links, but it brings its own rules about speed, range, interference, and who is allowed to join.

You'll start with the Wi-Fi standards (802.11) and the 2.4 GHz, 5 GHz, and 6 GHz bands, then look at how a WLAN is built from access points, SSIDs, and wireless LAN controllers. You'll also learn how channel planning reduces interference and how WPA2 and WPA3 protect wireless traffic.

Once you can design and configure a basic wireless network, you'll be ready for the next module, Network Security, which covers how to protect the whole network.

Lessons

4 videos
01

Wireless Fundamentals: Wi-Fi Standards, RF Bands and Service Sets

Jeremy's IT Lab covers how wireless LANs work, including 802.11 standards, 2.4 GHz and 5 GHz bands, channels, and service sets like BSS and ESS.

02

Wireless Architectures: Autonomous, Lightweight and Cloud-Based APs

How access points connect to the network, the 802.11 association process, and the different wireless LAN controller deployment models.

03

Wireless Security: Authentication, Encryption, WPA2 and WPA3

How wireless networks are protected, from open and WEP authentication to 802.1X/EAP methods, plus the TKIP, CCMP and GCMP encryption protocols.

04

Wireless Configuration: Setting Up a WLAN on a Controller

A hands-on walkthrough of configuring a wireless LAN through the controller GUI, including WPA2 pre-shared key security.